Multi – Stage

• First Stage: Pre Rinse – pumped from third stage rinse tank – drained to Plant drain.
• Second Stage: Wash – Pressurized high volume hot chemical. Wash-recycled through filter and steam heated tank.
• Third Stage: Clean Rinse – Pressurized high volume Rinse – recycled through filter and cold water tank.
• Fourth Stage: Sanitized – main pressure injection of chlorine up to 200 PPM and drain to plant.

Conveyor System:

• Dual 2060 stainless steel conveyor chain run in nylon grooves. (Optional third length chain system)
• SS drive shafts and sprockets.
• Nylon flanged type sealed bearings.
• Adjustable chain speed controller.
• SS 304 square tubing and angle framework.
• SS 11 and 16 gauge shrouding and sheet metal work.
• Poly Neoprene curtains between stages and on each end.
• Tension adjuster.
• Adjustable guild rails for different size tote and tray.

Nozzle Manifold System:

• All stainless steel nozzles and manifold piping.
• SS adjustable angle ball-joint.
• High Impact inner tote cleaning nozzle.
• Easily adjustable to height of container for maximum impact.
• Rugged access doors for easy maintenance.

Pumps Systems:

• Industrial grade continuous duty.
• Seal less, vertical pump designed for no maintenance.
• Proven in pumping high volume high temperature chemicals and dirty fluids.
• TEFC, 575 Volt, 3 Phase Motors.
• Wash stage pump – 10 HP, 175 GPM, 70 PSI.
• Clean rinse stage pump – 7.5 HP, 125 GPM, 70 PSI.

Tanks System

First Stage:

• Drip Tray catches all sprayer debris and drained fitting to connect to plant drains.

Second Stage:

• 175 Gallon SS insulated tank.
• SS Steam heating manifold.
• (Optional) 40 KW 600 volt electrically heated tank
• Temperature controller turns on and off steam valve.
• Temperature gauge.
• Low water pump cut out.
• Automatic refill float valve.
• Large drain valve and sloped for fast and easy wash out.
• Large rectangular filter basked to catch foreign material before being repumped to nozzles.
• (Optional) P.H. controller, sensor and chemical pump to control and maintain chemical strength in tank.)

Third Stage:

• 125 Gallon SS Tank
• Large drain valve and sloped for fast and easy wash out.
• Automatic refill float valve.
• Low water pump cut out.
• Large rectangular basket filter to catch foreign material before being pumped through nozzles.

Fourth Stage:

• Drip tank catches all and drains to plant.
• (Optional) Sanitizer recycle is available, although mostly not recommended, only for iodine base disinfectant.
• (Optional ORP controller, sensor and chemical pump) To control and ensure sanitize strength.

Control Panel:

• Control panel mounted to system.
• Stainless Steel Nema 4 water tight.
• Prewired to all components on system.
• Complete with all necessary starters, overloads, fuses, control transformers, indicator lights and controls as required.

Options (Please Call for Pricing):

• PH – Control System
• ORP – Control System
• Electrically Heated Package – 40KW
• Third Run of Conveyor Chain
• Recycling Sanitizing Pump and Tank System