The company stands tall as an Exporter and Supplier of Digital Laser Rangefinders in Canada. The Digital Laser Rangefinders can measure the distances without contact. The Digital Laser Rangefinder is a device that uses technology "laser" to measure distance, length, height, levels of solids and liquids without contact, and is also used as a safety device against collision of mobile machinery. The reading made by the Digital Laser Rangefinders, in addition to them being displayed on the digital display, is also transmitted by analog voltage or current, as well as digital signal on RS485 serial communication interface. The special design of the Digital Laser Rangefinders is due to the use of the latest generation components. The Digital Laser Rangefinders are known for their rugged construction. The Digital Laser Rangefinders are versatile and ideal for use in harsh environments such as those found in industrial areas and ports. Electrical Features Of Digital Laser Rangefinders

• Measuring Range : 0.3 to 120 m (indoor) and 0.3 to 80 m (outdoor use)
• Normal Accuracy : 3 mm +
• Maximum number of measurement per second : 2
• Measurement Resolution : 1mm
• Laser : 635 nm, 1 mW, class II b
• Diameter Of Laser Beam : 20 mm to 80 m away
• Three buttons mounted on the panel for programming
• Mode programming menu panel
• Power Supply : 110/220 VAC 50/60 Hz, 15 VA
• Data retention in case of failure/lack of energy (without batteries)
• Display location alphanumeric LED 5mm in height with 8
• Characters for presentation of measurement, visualization functions and parameters, plus an LED polarity
• Programming for direct display in engineering units, such as: meter, millimeter, liter, m3, etc
• Isolated analog output programmable and adjustable trimpots without using D/A converter for 16-bit
• 0 to 10V or 4 to 20mA, proportional to the measuring range programmed
• Serial communication interface RS485, isolated, with MODBUS-RTU (optional)
• Two independent outputs programmable limits, with comparison operation on the measured value of: with digital output isolated solid state or relay (configurable)
• A digital output for supervision of operation Optical isolated solid state or relay (configurable)
• A constant division and multiplication independent programmable from 0 to +9999.9999-point conversion to decimal measures
• Robust electrical connection via plug connector male/female 15-way

• Supplied in aluminum case, stainless steel tubing for water cooling, hood protection to the glass window, with the possibility of using compressed air to prevent entry of dust, simple installation with adjustable vertical and horizontal
• Dimensions : 400 mm long, 300 mm high and 100 mm deep
• Degree Sealing : IP65
• Weight : 7kg